Micon Automation Systems Private Limited

• Accuracy : 0.2%FS ± 0.1℃
• Input : Thermocouple: K, S, R, E, J, N, T, B, N, WRe3-WRe25, WRe5-WRE26, Cu50, Pt100, Analog signal
• Output : Relay, SSR Drive, Analog signal
• Power supply : 100ï½240VAC, -15%, 10% / 50-60Hz; 120ï½240VDC; or 24VDC ºC / ºF Selectable
• Communication : RS-485, RS-232(plug-in module)

• Input type: (Any of below specifications can be used selectively in the same instrument) Thermocouple: K, S, R, E, J, N, T, B, N, WRe3-WRe25, WRe5-WRE26 Resistance temperature detector: Cu50, Pt100
• Measurement accuracy : 0.2%FS ± 0.1???
• Resolution : 0.1 or 0.01??? for temperature measurement, 1/20000 unit for linear signals, and minimum voltage resolution is 1uV
• Temperature drift : ≤0.01%FS /??? (typical value is 50ppm/???)
• Sampling period : read A/D converter 12.5 times per second
• Response time : ≤0.5s ( when digital filter parameter FILt=1); ≤3s for 0.01??? measurement
• Alarm function : high limit, low limit, deviation high limit and deviation low limit; with alarm blocking at the beginning of power on.
• Control mode: On-off control mode (Hysteresis adjustable) Standard PID with auto tuning AI PID with auto tuning, adopting Yudian AI algorithm.
• Control period : 0.2120.0 seconds selectable, and it should be integer times of 0.24 second. 5
• Output mode (modularized)
• Relay output (NO NC): 250VAC/2A or 30VDC/2A
• TRIAC no contact discrete output (NO or NC) : 100240VAC/0.2A (continuous), 2A (20mS instantaneous, repeat period≥5s)
• SSR Voltage output : 12VDC/30mA (used to drive SSR).
• Thyristor zero crossing trigger output: can trigger TRIAC of 5500A, a pair of inverse paralleled SCRs or SCR power module. Single-phase or three-phase trigger is selectable.
• Linear current output: 020mA, 420mA (Output voltage ≥11V, maximum load resistor 500ohm, output precision 0.2%FS)
• Electromagnetic compatibility (EMC) : ±4KV/5KHz according to IEC61000-4-4; 4KV according to IEC61000-4-5.
• Isolation with standing voltage : between power, relay contact or signal terminal ≥2300VDC; between isolated electroweak terminals ≥600VDC
• Power supply : 100240VAC, -15%, 10% / 50-60Hz; 120240VDC; or 24VDC/AC, -15%, 10%.
• Power consumption : ≤6W 6
• Operating Ambient : temperature -1060???; humidity ≤90%RH

Universal thermocouples and selectable RTDs and linear current/voltage signals. Integrating non-linear graduation tables, digital calibration and auto zero technology to achieve accurate and stable measurement.

• Advanced artificial intelligence (AI) control algorithm with auto tuning function without overshooting.
• Auto/manual bumpless switch and soft-start function.

Specification:

• Accuracy : FS /-0.3%, Sample Time : 500ms
• Input : Thermocouple, K, S, R, E, J, N, Cu50, Pt100, Analog signal
• Output : Relay, SSR Drive, Analog signal
• Power Supply : 100-240VAC (50/60Hz) or 24VDC ºC / ºF Selectable
• Communication : RS-485
• Soft Start Function
• Auto/Manual Selectable
• Alarm function : high limit, low limit, deviation high limit and deviation low limit; with alarm blocking at the beginning of power on. 2
• Front panel dimension : 96×96mm, 160×80mm, 80×160mm, 48×96mm, 96×48mm, 48×48mm, 72×72mm
• Panel cutout dimension : 92×92mm, 152×76mm, 76×152mm, 45×92mm, 92×45mm, 45×45mm, 68×68mm

• Accuracy : 0.2%FS ± 0.1℃
• Input : Thermocouple: K, S, R, E, J, N, T, B, N, WRe3-WRe25, WRe5-WRE26, Cu50, Pt100, Analog signal
• Output : Relay, SSR Drive, Analog signal
• Power supply : 100ï½240VAC, -15%, 10% / 50-60Hz; 120ï½240VDC; or 24VDC ºC / ºF Selectable
• Communication : RS-485, RS-232(plug-in module)

• Input type: (Any of below specifications can be used selectively in the same instrument) Thermocouple: K, S, R, E, J, N, T, B, N, WRe3-WRe25, WRe5-WRE26 Resistance temperature detector: Cu50, Pt100
• Measurement accuracy : 0.2%FS ± 0.1???
• Resolution : 0.1 or 0.01??? for temperature measurement, 1/20000 unit for linear signals, and minimum voltage resolution is 1uV
• Temperature drift : ≤0.01%FS /??? (typical value is 50ppm/???)
• Sampling period : read A/D converter 12.5 times per second
• Response time : ≤0.5s ( when digital filter parameter FILt=1); ≤3s for 0.01??? measurement
• Alarm function : high limit, low limit, deviation high limit and deviation low limit; with alarm blocking at the beginning of power on.
• Control mode: On-off control mode (Hysteresis adjustable) Standard PID with auto tuning AI PID with auto tuning, adopting Yudian AI algorithm.
• Control period : 0.2120.0 seconds selectable, and it should be integer times of 0.24 second. 5
• Output mode (modularized)
• Relay output (NO NC): 250VAC/2A or 30VDC/2A
• TRIAC no contact discrete output (NO or NC) : 100240VAC/0.2A (continuous), 2A (20mS instantaneous, repeat period≥5s)
• SSR Voltage output : 12VDC/30mA (used to drive SSR).
• Thyristor zero crossing trigger output: can trigger TRIAC of 5500A, a pair of inverse paralleled SCRs or SCR power module. Single-phase or three-phase trigger is selectable.
• Linear current output: 020mA, 420mA (Output voltage ≥11V, maximum load resistor 500ohm, output precision 0.2%FS)
• Electromagnetic compatibility (EMC) : ±4KV/5KHz according to IEC61000-4-4; 4KV according to IEC61000-4-5.
• Isolation with standing voltage : between power, relay contact or signal terminal ≥2300VDC; between isolated electroweak terminals ≥600VDC
• Power supply : 100240VAC, -15%, 10% / 50-60Hz; 120240VDC; or 24VDC/AC, -15%, 10%.
• Power consumption : ≤6W 6
• Operating Ambient : temperature -1060???; humidity ≤90%RH

l The input can be freely selected as thermocouple, RTD, voltage, current, etc. There’s a non-linear correction table inside, and no need for correction.

l Adopts advanced modular structure, provides various kinds of output specifications and meeting a wide range of applications.

l Humanized operation method, easy to learn and use.

l With standard PID, AI artificial intelligence adjustment APID, MPT and other adjustment methods, and excellent control characteristics including self-tuning, self-learning function, no overshoot and no undershoot.

l Equipped with power-off alarm function to avoid false alarms when powered on.

l Support RS485 or RS232 communication interface, can be used as the lower machine for AIDCS, split paperless recorder and touch screen control system.

l AI-516P/526P has program control function and adopts AI artificial intelligence adjustment algorithm with a curve fitting function to obtain a smooth curve control effect.

l Anti-interference performance meets the requirements of electromagnetic compatibility under harsh industrial conditions.

YUDIAN Make AI-708/808 PID Controller:

• Digital calibration technology for input measurement with input measurement accuracy 0.2% F.S., non-linear calibration tables for standard thermocouples cheap replica watches and RTDs are available in the instrument.
• Advanced AI control algorithm, no overshoot and with the function of auto tuning and self-adaptation.
• Adopt advanced modular structure,plentiful output options,satisfy the requirements of various applications, and make quick delivery and conveniences the maintenance of the instrument.
• Friendly and customized operating interface,easy learning Fake Watches Online For Sale and simple manipulation. Any parameter can be promoted to immediate operator access in Field Parameter Table or password protected in Full Parameter Table.
• High quality and performance hardware design, using high performance tantalum capacitor or ceramic capacitor,it consumes less electricity, experiences less temperature shifting, provides higher stability and reliability, and can work in a wider range of temperature.
• ISO9001 best replica watches and CE certified, complying with EMC requirement,achieving world class level of quality,anti-interference ability and safety.

Specification: