Micon Automation Systems Private Limited

USB TO SERIAL CONVERTER ATC-810

RS 232 TO USB CONVERTER:

• Support the RS232 Serial interface
• Over 460Kbps data transfer rate
• Support remote wake-up and power Management.
• Every time same COM number when use.
• USB Specification rev.1.1/2°0 compliant

System Requirements:

• IBM PC 486DX4-100 MHz CPU or higher/compatible system
• Available USB port
• CD-ROM drive
• Windows 98/2000 /XP. or iMAG

Specification:

USB TO SERIAL CONVERTER ATC-820

RS 485 TO USB Converter:

• Operational system virtual serial port driver.
• Support remote wake-up and power Management.
• Every time same COM number when use 1 MBPS data transfer rate.
• USB Specification rev.1.1/2°0 compliant Operational system virtual serial port driver.
• Automatic flow control for RS485 Half Duplex.
• MaximumRS-485 cable length : 1200 m
• Support the RS485 Serial interface
• Maximum number of devices in the RS485 network: Half Duplex to 32 devices
• Power: from the USB port.
• RS-485 bus protection: 600W.
• USB connection: Mini-B connector. 100cm cable with the module.
• RS-485 connector: DB9M or RJ-45 type accepting
• ABS enclosure: 67 x 30 x 24 mm(not include cable)

Specification:

USB TO SERIAL CONVERTER ATC-830

USB to TTL Converter:

• Operational system virtual serial port driver.
• Supports Windows 98/ME/XP/2000/CE, MAC & Linux 2.4.20 or superior.
• Field Interfaces:TTL logic
• Maximum TTL cable length : 15 m
• USB connection: Mini-B connector.120mm cable with the module.
• TTL logic connector: DB 9 Male type accepting

Specification:

USB To RS-422 Converter

Description :

• The ATC-840 module is a cost-effective way to convert RS422 industrial buses to a USB interface. When connected to a PC USB port the ATC-840 module is automatically detected and is installed as a native COM port which is compatible with any existing serial communication application. Muliple modules can be installed when using USB hubs thus allowing a hassle-free configuration of a multi serial system without any IRQ or DMA configuration.They have 600W protect between the USB port and RS422 protects the PC from spykes or possible misconnections in the communication bus.

• Computer interface : USB 1.1 2.0 Plug and Play.
• Operational system virtual serial port driver.
• Supports Windows 98/ME/XP/2000/CE/Vista, MAC & Linux 2.4.20 or superior.
• Field Interfaces : RS-422 Full Duplex , Automatic flow control for RS422 Full Duplex.
• Transmission rate : from 300 bps to 1Mbps.
• Maximum RS-422 cable length : 1200 m
• Maximum number of devices in the RS-422 network : Full Duplex to 32 devices
• Power: from the USB port.
• Consumption : <100 mA.
• RS-422 bus protection : 600W.
• USB connection : Mini-B connector. 100mm cable with the module.
• RS-422 connector : DB 9Male
• ABS enclosure : 60 x 57 x 24 mm(not include cable)
• Operating environment : 0 to 70°C, 10 to 90% relative humidity, non-condensing.

USB TO SERIAL CONVERTER ATC-850

USB TO RS-232/485/422 ISOLATED INTERFACE CONVERTER

• Computer interface: USB 1.1 2.0 Plug and Play.
• Operational system virtual serial port driver.
• Maximum RS-485 cable length : 1200 m
• Power: from the USB port
• Consumption: <200 mA.
• Isolation: Isolation voltage 3500VRMS 500VDC sequence
• USB port RS-232/422/485 bus protection: 600W.
• USB connection: USB -B female connector. 1m USB-A to USB-B cable.
• RS-232 connector:DB9 male
• RS-422/485 connector: 6-bit terminal socket

Specification:

USB TO SERIAL CONVERTER ATC-804

• Operational system virtual serial port driver.
• Supports Windows 95/98/Me, 2000, 2003, XP, Vista,Win7, CE, Linux ,MAC
• Power: From the USB port or external power.
• RS-232 protection: 15KV ESD. 600W surge protection.
• USB connection: USB B Female connector.
• RS-232 connector: DB9 male.
• Aluminum enclosure dimensions 135 x54 x 108 mm
• Weight 0.8Kg with USB cable

Specification:

Serial To TCP/IP Ethernet Converter ATC-1200/ATC-1000

• 3-in-1 RS-232/422/485 interface Max.230Kbps Serial interface and 10/100 Mbps Ethernet
• Supports 4- and 2-wire RS-485 with AUTO-SEND™ and built-in terminator
• Supports industrial 24 VDC power input and optional Power over Serial
• Terminal block accessories for easy RS-422/485 serial wiring Supports IP configuration by MAC address.
• Supports configuration store and copy for easy deployment
• Supports Driver, TCP Server/Client, UDP Server/Client, Pair Connection operation modes
• Easy and powerful configuration program
• Approval CE, RoHS