Micon Automation Systems Private Limited

We have established ourselves as a renowned manufacture and supplier of ATC-2000WF Wireless to Serial Converters. Excellent quality material and components are used in the manufacturing process so as to ensure their longer service life and performance. Furthermore, our valued clients can avail these products from us in various specifications as per their requirements.

Other information:

• Computer interface: 3 in 1 RS232/RS 422/RS485 interface
• Support: Ad Hoc‚ infrastructure‚ Pseudo IBSS mode support
• Transmission rate: Auto negotiating 10/100 MBPS Ethernet
• Signal indication: LINK(Indicate WLAN status)‚ DIS(Indicate WLAN status)
• ACT (Transmit data serial to WLAN)
• PWR (Power Indication)
• Supply: 9~36VDC
• Range: 1000ft.(open environment)
• Working environment: 0°C~55°C‚ 95%RH

Features:

• Worldwide standard protocol
• Automatic IP configuration protocol
• An external antenna increases
• Password authentication and IP filters
• Support windows virtual port driver

Specification:

ATC-3200 Wireless To serial Converter:

• Utilizes globally available 2.4 GHz ISM band
• Control and Configuration with UART commands.
• 65535 unique node addresses, IDs allow multiple large networks to coexist.
• Programmable Transmit Power Output, max. 12 dBm
• Complete IEEE 802.15.4 spec compliant
• Typical Receiver Sensitivity –102 dBm
• Typical Throughput rate 250,000 bps
• Obstructed signal range to 500 meters @ 12dBm/PA and -102dBm/LNA
• Multiple Low Power Operating modes
• 3-in-1 RS-232/422/485 interface Max.115.2Kbps Serial interface and zigbee
• Supports 4- and 2-wire RS-485 with AUTO-SEND™ and built-in terminator
• Supports industrial 24 VDC power input and optional Power over Serial
• Terminal block accessories for easy RS-422/485 serial wiring
• Easy and powerful configuration program
• Approval CE, RoHS

Specification:

RS-232/485 Mini Power Wireless Module_500m :

Description :

• ATC-871 wireless digital transmission module offers standard RS-232, RS-485 and UART/TTL level interfaces for direct connection with computers, use''s RS-485 equipments, SCM or other UART parts.ATC-871 has adopted half duplex communication channel most suitable for point to multipoint communication mode. The primary station takes full control of communication harmony, and adopts data frames with address codes for data or command transmitting. The secondary station shall fully receive them and select response by comparing address codes; all the work shall be fulfilled by upper layer protocols, which shall ensure that only one wireless module in the communication network is in the transmitting state in any instant to avoid mutual interference.
• Therefore, the transmission channel built by ATC-871is transparent to the user. ATC-871 can also be applied to point to point communication, making it easier and smoothly upgrade wire (RS232/485/TTL) transmission mode in original system.

Specification:

Specification: