Micon Automation Systems Private Limited

We are one of the prominent manufacturers and suppliers of a wide range of Yudian Low Cost PID Temperature Controllers. These controllers are manufactured in compliance with the set industry standards and norms using high-grade raw material and advanced technology. Our offered controllers are widely known for their features like accuracy, compact size and high performance.

A brief description of this product is given below:

• Input: K‚ E‚ J‚ N (Thermocouple) and PT 100 (RTD)
• Output: Relay‚ SSR (Installable)
• Control algorithm: AI PID OR ON/OFF; auto tuning
• Set point: Set point range limit
• Alarm: High and high deviation
• Power supply: SMPS 100~240VAC/DC‚ 50 Hz OR 24 V AC/DC
• Accuracy: 0.3% FS± 1° C
• Display resolution: 0.1° C
• Features: Over range and sensor fail output off‚ auto tuning‚ input offset
• Size (W x H x D): 48 x 48 x 95 (D2 size)‚ 72 x 72 x 95 (D size)‚ 48 X 96 X 95 (E size), 96 X 48 X 95 (F size), 6 x 96 x 100 (A size)

Basal function of instrument:

• Economical intelligent temperature controller
• SSR voltage output, no alarm output
• SSR voltage output 1 relay alarm output (N.O. / N.C.) or 1 contact output, but no alarm output
• SSR voltage output 1 relay alarm output (N.O.) and 1 contact output and alarm output

We are one of the prominent manufacturers and suppliers of a wide range of Yudian Make Universal PID Controller. These controllers are designed as per the requirements of our clients of our in compliance with the international standards and norms. Moreover, the controllers offered by us are widely appreciated for their features like accurate results, durability, reliable performance and low maintenance.

Other Model available: AI 518 / AI 519

Specifications:

• Input: Universal (All type of thermocouple and PT100‚ Cu50 (RTD)‚ linear voltage‚ linear current‚ MV‚ 2 wire transmitter input)
• Output: Relay‚ SSR‚ linear voltage‚ linear current‚ SCR phase shift trigger‚ (Plug in type Modules); soft start option (AI 519)
• Output range limit
• Control algorithm: AI PID or on/off; heating / cooling dual output with 2 sets of PID; auto tuning; auto/manual bump less transfer (AI 519)
• Set Point: Set point range limit; dual set point switch
• Alarm: High‚ low‚ high deviation and low deviation (Plug in type modules)
• Alarm blocking at the beginning of power on
• Communication: RS 485‚ RS 232 (Plug in type modules)
• Re transmission O/P: Linear current or voltage (Plug in type modules)
• Power supply: SMPS 100~240VAC/DC‚ 50 Hz OR 24 V AC/DC
• Accuracy: 0.3%FS
• Display resolution: 0.001° C (Selectable)
• Other features: Over range and sensor fail output off‚ input offset, light bar output display (A2 Size) and A/M key on front (AI 519); user defined password
• Temp.: 10°C~60°C
• Humidity: <90%RH
• Size (W x H x D): 48 x 48 x 95 (D2 size)‚ 72 x 72 x 95 (D size)‚ 48 X 96 X 95 (E size), 96 X 48 X 95 (F size), 96 x 96 x 100 (A size), E5 (DIN rail mounting), A2 (Light bar output display)

Other Details:

• Economical, Efficient and Easy to Operate
• 3, 4 and 5 indicate the module installed in OUTP, ALM and AUX sockets.
• Support different Thermocouple and RTDs input. Temperature Controller
• Range is from -50°C to 2300°C
• Accuracy 0.3%FS ± 0.1C (0 Decimal)

Specification:

Minimum order quantity: 1 Piece

• KR1--Dimensions 78 x 35 mm, depth 78 mm + 14 mm (removable terminal block)
• KM1--Dimensions 48 x 48 mm (1/16 DIN), depth 48 mm + 14 mm (terminal board)
• KX1--Dimensions 48 x 96 mm (1/8 DIN), depth 76 mm
• IP65 front protection rating, with screw-type tie-rod (optional)
• Double LED display:
  - Main display: 4 digits, 3 dynamic colors red, green and amber 10.9 mm
  - Secondary display: 4 digits, green color h 6 mm
• 1 input for temperature probes: tc J, K, S, R, T; infrared sensors J and K; RTD Pt 100 and PT1000 2 wires; PTC KTY81-121 (990 Ω @ 25 ° C); NTC 103AT-2 (10KΩ @ 25 ° C), for mV signals 0/12 ... 60 mV or standardized signals 0/4 ... 20 mA, 0/1 ... 5 V, 0/2 .. 10 V
• Measurement accuracy: ± 0.5% span ± 1 digit; tc S ± 1% span ± 1 digit
• 1 or 2 digital inputs for voltage free contacts, according to the instrument configuration code (the second digital input is an alternative to OUT4)
• Power supply: 24 VAC / VDC ± 10%, 100 ... 240 VAC / VDC (-15% / + 10%) Frequency: 50/60 HZ
• Absorption: 7 VA max.
• OUT1: SPDT relay 4A / 240 Vac or voltage for SSR driving 13V max @ 1mA, 10.5V min @ 15mA ± 10%
• OUT2: SPST-NO relay 2A / 240 Vac or voltage for SSR driving 13V max @ 1mA, 10.5V min @ 15mA ± 10%
• OUT3: SPST-NO relay 2A / 240 Vac or voltage for SSR driving 13V max @ 1mA, 10.5V min @ 15mA ± 10%
• Programmable OUT4: in voltage for driving SSR 13V max @ 1mA, 10.5V min @ 15mA ± 10% or power supply for transmitter or digital input
• 3 Configurable alarms as absolute, deviation and band
• 4 Selectable set points
• Serial communication: TTL (standard) + RS 485 (optional) isolated, MODBUS RTU protocol (JBUS)
• Communication speed: 1200 ... 38400 baud
• PID single and double regulation with overshoot control, ON / OFF, ON / OFF Neutral Zone, Autotuning, Self-tuning
• Independent timer with 5 operating modes
• EVOgreen function : timed switch-off of the display that can be set without the operator
• Wattmeter for the calculation of the instantaneous power and the consumed energy
• Counting hours worked: a non-cancelable combi counter and a second resettable counter with alarm
• Connections: 16 2.5 mm² screw terminals (AWG22 ... AWG14) on fixed, withdrawable or spring terminals

ARTIFICIAL INTELLIGENT INDUSTRIAL CONTROLLER

• Applicable for accurate controls of Temperature, Pressure, Flow, Level and Humidity etc.
• Support Various Thermocouples, RTDs, Linear Voltages / Currents / Resistances fake rolex for sale and Radiation
• Modularization output supports SSR voltage, Linear Current / Voltage, Relay Contact, TRIAC non-contact switch,
• Single phase / three-phase Thyristor zero-cross triggering.
• Support multiple alarm function of high limit, low limit High Deviation and Low Deviation, Providing alarm blocking at the power start-up to avoid false- alarm.
• Typical baud rate AIBUS or MODBUS protocol, supporting RS485 OR RS232 communication port

Yudian temperature control module AI-516D7 rail mounting with display / thermostat, Yudian new D7 digital display module, the product is small in size, easy to use, can be widely used in space-saving applications for data acquisition and temperature control. 
Input: universal input; 
output: main output can choose solid state relay SSR output, relay switch output, thyristor trigger output, linear current or voltage output and other output modes; 
communication: instrument with RS485 communication, support AIBUS and MODBUS Dual communication protocol for easy connection to touch screen or PLC. 
Alarm: It has a one-way switch alarm function. 
Program control function: AI-516PD7/AI-516PE7 adds 30-stage program control function, and the heating rate is adjustable.

Other Details:

• Thermocouple / PT-100 Selection
• Relay omega replica watches or SSR Output

Basic function of instrument AI-208 economical intelligent temperature controller

• AI-208G,with SSR voltage output, no alarm output
• AI-208GL1,with SSR voltage o/p 1 Relay alarm o/p (N.O./ N.C.) OR 1 contact output,no alarm o/p.
• AI-208GL5,with SSR voltage o/p 1 Relay alarm o/p (N.O.) & 1 contact o/p & alarm o/p.

Front panel dimension:

• D2 front panel 48 X 48mm2 (width X height), cut out 45 X 45mm2
• D front panel 72 X 72mm2 (width X height), cut out 68 X 68mm2
• A front panel 96 X 96mm2 (width X height), cut out 92 X 92mm2

Specification: